2015 Ford Explorer

My 2015 Ford Explorer is subject to an open rearview camera safety recall (Ford recall 25SA9 / NHTSA recall 25V695), and the recalled rearview camera has now failed. The camera is no longer functioning properly, leaving me without the rearview camera image when backing up. Despite the failure of the recalled component, I have been unable to have the vehicle repaired because Ford has not made the recall remedy/part available for my 2015 Explorer. I have been waiting for the recall repair for an extended period of time. This is an active safety issue, not simply a notice for a component that might fail in the future. The recalled component in my vehicle has already failed, yet I am still being required to operate the vehicle without the safety feature because the manufacturer has not made the recall repair available. I am especially concerned about the risk when backing out of driveways and parking spaces where pedestrians or children may be behind the vehicle. I am requesting that NHTSA review Ford’s continued delay in providing a remedy for affected 2015 Explorer owners whose recalled cameras have already failed.

The contact owns a 2015 Ford Explorer. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed an inverted image without guidelines. The dealer was contacted and confirmed that the parts were unavailable. The contact stated that the manufacturer failed to perform the recall repair in a reasonable amount of time for the recall repair. The failure mileage was approximately 120,000.

The contact owns a 2015 Ford Explorer. The contact stated that while reversing at an undisclosed speed, the message "Contact Service Center" was intermittently displayed on the instrument panel, and the rear-view camera intermittently became dark and the image was distorted. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 113,000.

The contact owns a 2015 Ford Explorer. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while reversing, the back over prevention camera image was hazy. The failure mileage was 150,000.

The contact owns a 2015 Ford Explorer. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse(R), the back over prevention camera displayed a black screen and displayed the image at the rear of the vehicle momentarily. Occasionally, the message, "Camera not Available," was displayed. The dealer was contacted and confirmed that the part was not yet available. The manufacturer was contacted; however, the contact was unable to speak with a representative. The failure mileage was approximately 93,000.

While driving, the traction control failed, which caused the vehicle to no longer accelerate. Had to safely pull over and restart the vehicle, which reset the traction control warnings. But it happened again the next day. Losing power while driving is dangerous and scary.

The analog rearview backup camera module failed. The physical component is still installed in the vehicle and is available for inspection upon request. The driver is left completely blind to pedestrians, small children, and obstacles behind the vehicle when backing up. The driver is forced to repeatedly stop the vehicle in active traffic lanes to wait for the black screen to reset, creating an immediate risk of rear-end collisions. Yes. The failure was confirmed by a certified Ford dealership service department, which provided an estimate for a replacement camera module but failed to perform the physical repair. The vehicle was brought to a certified Ford dealership for inspection, but the service department turned the vehicle away, claiming the safety recall remedy was unavailable and refusing to log the inspection or create an official service record. There were no warning lamps or dashboard messages. The symptoms began in 2021/2022 with intermittent screen distortion and blue screens, which eventually degraded into a permanent, total black screen failure while shifted into reverse.

The contact owns a 2015 Ford Explorer. The contact stated while the vehicle was parked, the contact's brother became aware that the driver's side exterior B-pillar trim was loose. The contact was concerned that the front driver's side exterior B-pillar would detach and fall off while the vehicle was being driven. The dealer was made aware of the failure. The contact was advised to contact the manufacturer. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced NHTSA Campaign Number: 25V347000 (Structure); as a possible cause for the failure; however, the VIN was not associated with the recall. The failure mileage was approximately 65,000.

The contact owns a 2015 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure). The contact stated that while parked, the windshield molding trim next to the pillar and windshield became raised. The contact stated that while driving on several occasions at various speeds, the driver’s and passenger’s side windshield trim was flopping and was loose, and there was wind entering the vehicle through the windshield trim. The vehicle was taken to the dealer, where it was determined that the exterior A-pillar trim needed to be replaced. The vehicle was not yet repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.

Manufacturer Safety recall: # 24S02 2011-19 Explorer A-Pillar Trim Detachment Safety NHTSA: #24V031 [XXX] came a loose on FL interstate and reported to Riverside Ford 8-17-26 And dropped car off 8-18-26 They kept car two nights Call to pickup car but it was not fixed just ordered parts. My husband has to get [XXX] We have no transportation The car sits in our garage not drivable. Macon,GA [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2015 Ford Explorer. The contact received notification for NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was not available. The contact stated that while reversing, the rearview camera image was black, and the message "Camera Unavailable" was displayed. The dealer was contacted and informed the contact that the recall remedy was not available, but the vehicle could be repaired at the owner's expense with reimbursement provided later. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the failure. The failure mileage was approximately 140,000.

NHTSA Safety Complaint — Ford Recall 25V695 / 25SA9 Rearview backup camera has stopped working, limiting rear visibility. Camera is still installed and available for inspection. I cannot clearly see behind my SUV when backing, increasing the risk of striking a person, vehicle, or object. Hardy Family Ford confirmed the defective camera. Repair was delayed because the recall part was unavailable. Ford Recall 25V695/25SA9 remains unrepaired; Hardy Family Ford canceled my recall appointment because the remedy part is unavailable, despite my reporting this camera failure in 2022. I have been waiting for years for an available part. Ford issued a safety recall involving a defective rearview camera but the remedy remains unavailable. I have already been waiting for years for repair of this camera problem. My recall repair appointment was canceled because the required part was unavailable. Ford has an available new genuine Ford camera that the dealership can obtain, but Ford will not authorize its use under the recall. The only option offered to me is to personally pay $818 and seek reimbursement later. Ford Customer Relations has declined to provide another solution. Ford Complaint Case # CXH-08931193-Y5Q3B6