Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2011 Jeep Wrangler, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Jeep Wrangler year.
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
NHTSA has issued a do-not-drive warning covering 3 recalls on this make, model and year. Repairs are free at any franchised dealer.
Recalls are issued per model. Confirm whether this specific car has already been repaired using its VIN, free, at any franchised dealer or on nhtsa.gov/recalls.
NHTSA lists 11 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Campaign 19V018000
Issue: Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Chrysler is recalling certain 2009-2010 RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Chrysler is also recalling certain 2009 RAM 3500, RAM 2500, RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, Dodge Durango, Chrysler Aspen, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflator may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Issue: Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
Risk: These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Issue: Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Risk: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
Campaign 19V680000
Issue: Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Risk: Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
Campaign 16V288000
Issue: CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.
Risk: A MISSING OR INCORRECTLY INSTALLED RIVET COULD COMPROMISE THE ABILITY OF THE STEERING COLUMN TO SUPPORT THE OCCUPANT LOADS IN THE EVENT OF A FRONTAL CRASH, DECREASING THE EFFECTIVENESS OF THE FRONTAL IMPACT SAFETY SYSTEM. AS A RESULT, THE CONDITION MAY INCREASE THE POTENTIAL FOR INJURY IN A FRONTAL CRASH.
Remedy: DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Campaign 11V315000
Issue: Quadratec, Inc. is recalling certain aftermarket accessory, driver-side, Ultimate Floor Liners part numbers 14254.0301 07, 14254.0301 08, 14254.0301Q, 14254.0302 07, 14254.0302 08, 14254.0302Q, 14254.0303 07, 14254.0303 08, 14254.0303Q, 14254.0309 07, 14254.0309 08, and 14254.0309Q sold from May 1, 2012, through February 14, 2013. The liners are for use in 2007-2013 Jeep Wranglers. The anchor point for the affected floor liners may tear during use, particularly when exposed to high temperatures. The tearing may allow the floor liner to shift forward.
Risk: If the liner shifts forward it may impede the operation of the accelerator and possibly lead to unintended acceleration, which may increase the risk of a crash.
Remedy: Quadratec will notify owners and either exchange the liners or provide them with a hook guard kit to help secure the driver-side mat, free of charge. The recall began on April 4, 2013. Owners may contact Quadratec at 1-800-463-2998 or info@quadratec.com.
Campaign 13E010000
Issue: Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2013 Jeep Wrangler vehicles manufactured February 16, 2010, to July 19, 2013. Corrosion in the exterior heated power mirror electrical connector may result in an electrical short.
Risk: An electrical short increases the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will move the exterior mirror power feed to a separate connector, free of charge. Chrysler issued an interim notification to owners on December 8, 2014. The recall began on March 3, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P61.
Campaign 14V631000
Issue: CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2012 RIGHT HAND DRIVE (RHD) JEEP WRANGLER VEHICLES MANUFACTURED FROM FEBRUARY 1, 2007, THROUGH OCTOBER 10, 2011. SOME VEHICLES MAY BE EQUIPPED WITH DRIVER'S AIRBAG CLOCKSPRING ASSEMBLIES THAT COULD EXPERIENCE A COMPROMISED AIRBAG CIRCUIT RESULTING IN AN AIRBAG LAMP ILLUMINATION, WHICH INDICATES THAT THE AIRBAG MAY NOT DEPLOY.
Risk: A BROKEN ELECTRICAL CIRCUIT IN THE AIRBAG CLOCKSPRING WIRING ASSEMBLY CAN LEAD TO NON-DEPLOYMENT OF THE DRIVER FRONTAL AIRBAG AND WILL NOT BE ABLE TO PROPERLY PROTECT THE DRIVER IN THE EVENT OF A CRASH, INCREASING THE RISK OF INJURIES.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND REMEDY THE VEHICLES AS NECESSARY FREE OF CHARGE. CHRYSLER WILL MAIL TO OWNERS AN INTERIM NOTIFICATION DURING MARCH 2012. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Campaign 11V528000
Issue: CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010-2011 JEEP WRANGLER VEHICLES MANUFACTURED FROM JULY 12, 2010, THROUGH SEPTEMBER 10, 2010. SOME VEHICLES MAY EXPERIENCE A DEGRADATION OF FASTENER TORQUE FOR VARIOUS FRONT AND REAR AXLE ATTACHMENTS TO THE CHASSIS MODULE.
Risk: THIS COULD RESULT IN NOISE, OR ULTIMATELY, DEGRADATION IN STEERING AND HANDLING CHARACTERISTICS WHICH COULD LEAD TO LOSS OF DIRECTIONAL CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL RE-TORQUE ALL NINETEEN FASTENERS TO THE MAXIMUM RESIDUAL TORQUE VALUES. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 24, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Campaign 11V145000
Issue: Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 Jeep Wrangler right-hand drive vehicles manufactured February 1, 2007, through October 10, 2011. The affected vehicles have airbag clockspring assemblies that could experience broken airbag circuits.
Risk: In the event of a crash necessitating airbag deployment, a broken electrical circuit in the airbag clockspring wiring assembly can lead to non-deployment of the driver-side frontal airbag and will not be able to properly protect the driver, increasing the risk of injuries.
Remedy: Chrysler will notify owners, and dealers will replace the clockspring and add a steering wheel dust shield, free of charge. The recall began on June 10, 2013. Owners may contact Chrysler at 1-800-247-9753. This recall supercedes NHTSA recall 11V-528. Chrysler's recall campaign number is M31.
Campaign 13V176000
Campaign 18V021000
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Campaign 16V352000
The parts named most often across 485 owner complaints filed with NHTSA for this make, model and year.
2 crashes · 1 injured
1 fire
1 crash · 3 fires · 1 injured
2 fires
4 crashes · 4 injured
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
My abs control module is not functioning. The car does not stop properly in wet weather..the traction is effected. The abs control module was inspected by a dealership. The control module is non communicative to the abs module. The brake light, ABS light and the traction light are all on, all the time. I cannot get the vehicle inspected..If rain is dangerous, the upcoming winter is going to be treacherous.. I am extremely concerned for my safety. I’m having a difficult time finding the part for the year of my vehicle and I can’t fix this problem with out mfr intervention. I wrote to the Jeep manufacturer in Michigan for assistance in locating this part and have not heard back. My vehicle is not the only vehicle to have this problem and there should be a recall because the breaking system not functioning is a huge safety issue.
I was driving and the traction control light, down-hill decent, abs, and parking brake light came on. Diagnostics came back to the brake module being defective.
Hood latches failed 3 days after vehicle purchase. Hood blew into the windshield obstructing my view at highway speeds. Dealership claims they are not responsible for damages as the vehicle was sold as is, but states the vehicle passed safety inspections and was able to be driven on public roads. Insurance company is currently investigating. No warning lamps upon incident.
The contact owns a 2011 Jeep Wrangler. The contact stated that while driving at 35 MPH, the air bag warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the clock spring needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 173,000.
Brake, abs and traction dash lights come on permanently. Code pulled is C2200, abs internal failure. Replacement or repair parts unavailable due to manufacturer hold due to engineering issues. Can’t drive due to NC safety inspection fail.
Airbag deployed, vehicle collision did not occur
Jeep just quit while driving. Towed to dealership….dealership told us it was the TIPM and they couldn’t get another one for at least a year. No other options given. Had to tow the vehicle to my house from there!!!!! This is a known problem/recall for my Jeep her but for some reason my VIN number is not part of the recall…even tho it is obviously the same exact issue of your recall!!!!
My jeep wrangler Abs module has failed and needs to be replaced. But Jeep decided not to make this part anymore and now me and a LOT of others can’t get a new abs Module. My jeep is way too dangerous to drive now. When accelerating from a stop the vehicle barely kicks in like the tires don’t know what direction to move. When I’m coming to a stop the breaks don’t work right due to the ABS module. This is a big safety concern and jeep needs to be held accountable and fix this issue. This is a major issue and needs to addressed before people get into accidents. I’m sure some people already have.
ABS Module problem that was affecting the performance of my 2011 Jeep Wrangler JKU to the point I almost had to stop driving it cause it wouldn't change out of 1st gear. This particular module in my jeep is on back order due to engineer review and the release date keeps getting pushed out. Dealer has to program VIN to match the Jeep if and when they ever get any in stock. The part needed is Anti-Lock Brake System Module - Mopar (68089120AB) I have found similar parts on Amazon, but I see prices from $500 - $3000.
I have had my transmission in my jeep Wrangler fixed five times it is still barely working. As well as I am having an extremely bad death wobble when I drive, which is very unsafe for me and my son when we are in the vehicle. We have been trying to keep getting it fixed, but it seems like nothing is working. As well as my lights have been going in and out on my dashboard, which is again unsafe during the night. I am afraid for me and my sons safety and we are not wanting to keep driving this vehicle as well it barely passed emissions so I can get my tag for my plates. We are wanting to get something safer for me and my family.
ABS issues lights came on due to malfunctioning part. The part is unavailable and appears to no longer be available. Failure appeared a year ago and have been trying to find someone to replace. After taking to multiple shops, the last one finally told us the part is no longer available. With this being part of the braking system, it is very important to have working properly!
When braking since these lights are on it will cause issue with the brakes themselves as if they don’t want to brake fully. Now I’m a 32 year old man and am aware of making sure your brakes are good and fully functioning. I’ve noticed also the steering when slowing down too from this. Nothing underneath the vehicle is an issue for steering. All steering components are fully functioning. I’ve noticed issues with the clock spring in the Jeep as well. Sometime it comes and goes (most likely and electoral problem) geez who knew! Haha, however when I’m turning the airbag light will stay on then go off and the lights on the steering wheel themselves with turn off. They’ve been off for awhile now. Since this is happening on a daily basis. When owing down it’s cause a very big issue for me because it will make the jeep want to turn in any direction it may feel and sometimes that direction is in another lane mostly on coming traffic! I have not had the jeep looked at by a dealer but has been by a mechanic with a $3000 scanner and he still has the codes stored for me. No and no.
Showing 12 of 485 complaints.
6 open NHTSA investigations into this model. Investigations come before recalls, so these are potential defects not yet covered by one.
Rated configuration: 2011 Jeep Wrangler SUV 4WD