2020 Toyota Corolla

Part is the coolant bypass valve. Toyota has been taken to court but dealership claims now that I’m over 100k miles I can’t do it. There was also a second part about 10 years but I wasn’t clear on the details of the outcome. Toyota has acknowledged this issue in court but failed to do so at the customer level in my case. engine light came on at 97k and now I’m at 104k which is over that 100k mark. Issue is I’ve only take my car to Toyota for repairs. They have known about this but failed to repair or notify me of it. I would have immediately brought my car in at 97k if. I had known. This puts not only me but my 3 kids and entire family at risk every time i drive. This is known to the dealership and they been taken to court for failures to notify customers of this known defect. It’s been inspected by Toyota the last time I took it in about a week ago at 104k miles.

FAILED COMPONENT & AVAILABILITY: The manual transmission Concentric Slave Cylinder (CSC) failed internally. Due to caustic hydraulic fluid contamination and severe system pressure loss, I had to replace the internal CSC unit, the clutch disc, the pressure plate, the flywheel, the master clutch cylinder, and the hydraulic clutch lines. The failed components have been retained and are available for inspection upon request. SAFETY RISK: The plastic housing of the OEM slave cylinder cracked internally, spraying caustic hydraulic brake fluid inside the transmission bell housing and completely coating the flywheel, pressure plate, and clutch friction disc. This caused an immediate, sudden loss of hydraulic pressure, forcing the clutch pedal to drop and stick flat to the floorboard. This put my safety and the safety of others at extreme risk, as it suddenly prevented me from disengaging the clutch, shifting gears, or safely dropping the vehicle into neutral while driving in active traffic.CONFIRMATION & REPAIR: A certified Toyota dealership diagnosed the issue and issued an unaffordable repair estimate of $4,800 to fix this recurring manufacturer defect. Because of this extreme cost, I was forced to drop the transmission and perform the entire rebuild myself. The total out-of-pocket cost just for replacement parts was $3,200. The vehicle has not been inspected by police or insurance representatives as no crash resulted. WARNINGS & MILEAGE SYMPTOMS: There were no prior dashboard warning lamps, error messages, or clear physical indicators before either failure occurred. The loss of clutch pedal pressure happened instantaneously. This vehicle has suffered this catastrophic internal failure twice: the original factory-installed unit (part number 31400-19025) failed prematurely at 59,000 miles. The updated replacement part (superseded part number 31400-19027), which suffers from the exact same defective plastic composition, failed again just 40,000 miles later.

DESIGN FLAW & SAFETY RISK: Toyota critically mismatched the standard battery to the vehicle's electrical charging profile; an AGM battery should be specified from the factory. Engine programming drops alternator voltage during cruising, deeply discharging the battery, and forces high-voltage surges (15V+) into it during deceleration. Because standard batteries cannot handle these rapid recharge loads during deceleration, the internal thermal load routinely overheats and boils the liquid electrolyte, even when brand new. This continuous boiling vents volatile hydrogen gas and discharges corrosive battery acid inside the engine bay. This structural flaw culminated in an immediate safety hazard when the battery physically exploded under the hood, creating a severe risk of engine compartment fire, chemical acid burns, and complete vehicle electrical blackout in active traffic. COLLATERAL DAMAGE & HISTORY: The chronic discharge and boiling of highly corrosive battery electrolyte severely damaged and corroded surrounding critical vehicle components. The acid completely corroded the transmission mount, the metal battery holder restraint, and the body paint. Furthermore, the corrosive boil-over burned off and destroyed several electrical connectors, plastic shrouds, plumbing hoses, and sections of the primary engine wiring cable harness. Since owning this 2020 Toyota Corolla, the vehicle has suffered systematic electrical degradation, requiring a full battery replacement at least once every single year. The exploded battery could not be safely retained due to its hazardous, ruptured state. WARNINGS & INSPECTIONS: No dashboard warning lamps, battery alerts, or diagnostic codes were triggered on the display prior to the physical battery failure. The rupture and electrical blackout occurred instantaneously. The vehicle has not been inspected by police or insurance representatives as no crash resulted directly from the blast.

Design issue: The 12th-generation (E210) Corolla manual transmission utilizes a CSC unit containing plastic/ABS components that owners and forum communities frequently cite as a weak point prone to premature leakage and mechanical failure. This occured to my corolla on a roadway and presented a severe safety hazard.

The contact owns a 2020 Toyota Corolla. The contact stated that while driving at an undisclosed speed, the clutch failed to operate as intended. The contact stated that the clutch seized, and the RPM increased. No warning lights were illuminated. The vehicle was taken to the dealer; however, the failure was not duplicated. The contact stated that the failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,330.

A message came on the screen saying “engine maintenance required” and it’s not going away. Upon doing a google search, there is a common failure in the cooling system for these cars reported by a lot of owners.

The contact purchased a 2020 Toyota Corolla. The contact stated that they discovered a mileage discrepancy after the purchase. The vehicle was a private sale on Facebook market. At the time of purchase, the vehicle mileage was 52,000. It was later discovered that the vehicle’s title mileage was 132,000. The contact stated went the DMV, and he discovered the mileage 132,483.

Replace Heater Control Valve - Diagnostic code P2681 indicates an internal electrical failure within the heater control valve assembly, a condition commonly seen on Toyota vehicles. Testing showed the electrical portion of the valve is open and no longer maintaining proper circuit continuity, requiring replacement of the heater control valve assembly.

"On 04/09/26, I took my vehicle for regular maintenance and an oil change; no potential issues were reported. I operated the vehicle in good faith, trusting its safety. However, on Sunday, 05/03/2026, while driving at highway speeds, the clutch pedal failed and [stuck to the floor / slipped severely]. This caused an immediate loss of power to the wheels in high-speed traffic, creating a life-threatening situation and a high risk of a rear-end collision. No warning lights appeared prior to this failure."

Windshield Wiper Intermittent setting stopped working, and wipers no long return to their home position. This appears to be a common issue with Toyota. When driving in the rain, the wipers will freeze in the up setting, which is very dangerous for it to occur during heavy rain on the highway causing visibility issues. No warnings of any kind given, the wiper switch appears to just go bad, or wear out over time.

The contact owns a 2020 Toyota Corolla. The contact stated that while at a red light, the vehicle shut off with the check engine and several other unknown warning lights illuminated. The vehicle restarted after several attempts. The vehicle was taken to an independent mechanic and the failure was duplicated. The mechanic retrieved DTC: P1603; "Engine Stall History" (ECM recording an unexpected engine shutdown or a communication error with the Transmission Control Module (TCM). The mechanic associated the failure with NHTSA Campaign Number: 20V682000 (Fuel System, Gasoline) and referred the contact to the dealer for assistance. Several dealers were contacted, and the contact was informed that the VIN was not included in the recall. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 59,000.

Coolant water control valve short circuit. Causes dealer message that won't clear and dealer wants $600 to replace a $30 part. Part is extremely difficult to get to and should not be a wear item.