Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2015 Ford F-250 SD, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Ford F-250 SD year.
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
NHTSA has no NCAP crash-test rating for this model year, which is common for older, low-volume and heavy-duty vehicles.
NHTSA lists 3 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Ford Motor Company (Ford) is recalling certain model year 2015 F-250, F-350, F-450, and F-550 Super Duty trucks manufactured September 13, 2013, through March 28, 2014, and equipped with 6.2L gasoline or 6.7L diesel engines and 6R140 transmissions. An error with the transmission control software may be such that while shifting from "Park" to "Drive" the vehicle may display "Drive" but possibly engage "Reverse" for 1.5 seconds before engaging "Drive." Therefore, the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence, Starter Interlock, and Transmission Braking Effect."
Risk: If the vehicle is in "Reverse" while the while the gear selection shows "Drive," unexpected movement could occur, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will update the transmission software, free of charge. The recall began on May 6, 2014. Owners may contact Fords customer service at 1-800-392-3673. Ford's number for this recall is 14C04.
Campaign 14V204000
Issue: Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
Risk: If the steering locks, it can increase the risk of a crash.
Remedy: Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
Campaign 20E090000
Issue: Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
Risk: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.
Campaign 25V572000
The parts named most often across 1 owner complaint filed with NHTSA for this make, model and year.
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
The contact owns a 2015 Ford F-250. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention). The contact stated that while reversing, the rearview camera displayed a blank or distorted image. The vehicle was taken to the dealer, who inspected it and determined that the vehicle did not meet the requirement to replace the rearview camera. The vehicle was not repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 98,000.