2016 Ford Taurus

The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rear-view camera displayed an inverted, distorted, or blank image. The message "Rear-view Camera Unavailable" was displayed. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 160,000.

I own a 2016 Ford Taurus Limited that is covered under Ford Safety Recall 25SA9 / NHTSA Recall 25V-695 for the rearview camera. I received the recall notification in October 2025 stating that a remedy was not yet available and that I would receive another notification once parts became available. Nearly 10 months later, I contacted my local Ford dealership to schedule the recall repair. I was informed that they still do not have the required parts and that no nearby Ford dealerships have them available. I also contacted Ford’s customer service line, but the automated system simply states there are no updates available for this recall. My vehicle is experiencing the exact safety defect described in the recall. When I shift into reverse, the rearview camera no longer displays an image. Instead, the screen turns completely blue, leaving me without a functioning backup camera. This is no longer a potential safety concern—it is an active failure that affects the safe operation of my vehicle when backing up. I am extremely concerned that a federally recognized safety recall remains unrepaired even though my vehicle is now exhibiting the recalled defect. Despite my efforts to have the vehicle repaired, Ford has been unable to provide the necessary parts or any estimated timeline for when the repair will be available. I respectfully request that NHTSA review Ford’s continued inability to provide a remedy for Recall 25SA9 / NHTSA 25V-695 and investigate the prolonged delay in making repair parts available to owners whose vehicles are already experiencing this safety-related failure. Thank you for your attention to this matter.

The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V611000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the passenger’s side B-Pillar trim became loosened. The failure progressed and, upon further inspection, the passenger’s side B-Pillar trim detached, and the driver’s side B-Pillar trim became loosened. The local dealer was contacted, and the vehicle was repaired out-of-pocket. The manufacturer was not made aware of the failure. The failure mileage was approximately 156,000.

My backup camera rarely works and sometimes is upside down. It cuts in and out while backing up. There is a recall from Oct 2025 but still no fix.

The contact owns a 2016 Ford Taurus. The contact received notifications of NHTSA Campaign Numbers: 25V611000 (Structure) and 25V695000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The dealer was contacted, and an appointment was scheduled with the understanding that parts had been ordered; however, while contacting the dealer a second time, it was confirmed that parts were not yet available. The manufacturer was not made aware of the issues. The contact had not experienced a failure.

The contact's wife owns a 2016 Ford Taurus. The contact's wife was notified of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while in reverse(R) on several occasions, the rearview camera displayed a blank image intermittently and eventually became inoperable. The vehicle was taken to a dealer, where it was diagnosed that the rearview camera had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 60,000.

The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would appear blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was not yet available. The vehicle was taken to the dealer. The vehicle was not diagnosed or repaired. The dealers confirmed that the remedy parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide a remedy for the recall The approximate failure mileage was 29,000.

The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera intermittently operated; however, the image was distorted, upside down, or completely blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted and confirmed that the part was unavailable. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 84,000.

Bushing of the driver side rear toe link (aka lateral link, toe arm, etc.) separated, causing the rest of the toe link to disconnect from the tire. Images are available but the original part has been taken by the mechanic. Bushing likely failed from corrosion, though this vehicle only spent 4 of its 10 years in a heavily salted environment. The toe link is also intended to last the life of the vehicle and is not mentioned in the recommended maintenance per the vehicle manual. After the toe link separated control of the vehicle was lost. This occurred at a low speed (~25 mph) in a residential area so there were no injuries or property damaged. Service center has confirmed toe link failure. The vehicle and component have not been inspected by any other party. There were no signs of issue prior to the failure. A previous mechanic had indicated that the toe link was seized and could not be adjusted for an alignment but did not recommend replacement. There was no abnormal tire wear or handling of the vehicle prior to the failure. Though this could have been prevented through maintenance, there were no indicators of a failure besides the seized bolt mentioned by the mechanic. May indicate a wider issue similar to Ford's previous toe link problems.

The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a distorted image or a black screen intermittently while in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message "Rear-view Camera not Available" was displayed. The local dealer was contacted and confirmed that the remedy was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 92,000.

The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse, the back-over prevention camera displayed a black screen. The dealer was contacted and confirmed that parts for the recall repair were not yet available. The manufacturer was not made aware of the issue. The failure mileage was approximately 48,303.

The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The rearview camera image was either distorted, upside down, or the image was frozen on the screen. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 64,000.