Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2017 Jeep Wrangler, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Jeep Wrangler year.
NHTSA lists 5 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Risk: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
Campaign 19V680000
Issue: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
Risk: A vehicle stall can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Campaign 18V524000
Issue: Chrysler (FCA US LLC) is recalling certain model year 2017 Jeep Wrangler vehicles manufactured November 1, 2016, to November 3, 2016. The affected vehicles may have a fuel tank that has a cracked or broken control valve, possibly resulting in a fuel leak in a rollover event, debris in the fuel tank and/or the potential of over fueling the vehicle.
Risk: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Chrysler will notify owners, and Jeep dealers will inspect the fuel tank and replace fuel tank and sending unit, as necessary, free of charge. The recall began January 12, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S90.
Campaign 16V849000
Issue: Chrysler (FCA US LLC) is recalling certain model year 2016-2017 Jeep Wrangler vehicles manufactured June 16, 2015, to August 14, 2016. In certain crash conditions, the front impact sensor wiring may be pulled until it detaches before a signal can be received by the Occupant Restraint Controller (ORC).
Risk: If the ORC module does not receive a signal from the front impact sensor, both frontal air bags and the seat belt pretensioners will not deploy in the event of a crash, increasing the risk of injury.
Remedy: Chrysler will notify owners, and dealers will reroute the front impact sensor wiring and relocate the impact sensor branch, free of charge. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S76.
Campaign 16V734000
Issue: Chrysler (FCA US LLC) is recalling certain 2017 Dodge Caravan and Jeep Wrangler vehicles. The brake switches on these vehicles may malfunction, keeping the brake lights illuminated and/or allowing the vehicle to be shifted out of the PARK position without the brake pedal being pushed.
Risk: Having the brake lamps continuously illuminated or being able to shift the vehicle out of PARK when the brake pedal is not pressed (and the ignition is in the RUN mode) can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the brake switches, free of charge. The recall began March 22, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U09.
Campaign 18V098000
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
3 open NHTSA investigations into this model. Investigations come before recalls, so these are potential defects not yet covered by one.
Rated configuration: 2017 Jeep Wrangler 2 DR 4WD
The parts named most often across 311 owner complaints filed with NHTSA for this make, model and year.
2 crashes · 1 fire · 2 injured
1 fire
4 fires
5 fires · 2 injured
5 fires
9 crashes · 9 injured
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
The ABS warning light remains illuminated and the vehicle is displaying diagnostic trouble code C2200, indicating an internal failure involving the Anti-Lock Brake System (ABS) control module. I am concerned that this is a safety-related defect rather than normal wear. I have found multiple reports from other owners of 2017 Jeep Wranglers describing the same or substantially similar failure involving C2200, ABS module failure, and illumination of the ABS/traction-control warning lights. Owners have also reported difficulty obtaining replacement OEM ABS modules due to extended backorders or lack of availability. Because the ABS module is part of the vehicle’s braking and electronic stability-control system, I am concerned about operating the vehicle without these safety systems functioning properly. I am requesting that NHTSA review the pattern of ABS control-module failures involving 2017 Jeep Wranglers and determine whether further investigation or a safety recall is warranted.
The Jeep wrangler has a notoriously bad reputation with ABS Modules. Mine has been broken for over 2 years and I am unable to find a replacement part. I’ve ordered the part 4 times only to find that the item is back ordered. Almost every Jeep owner I know is driving without ABS due to the module breaking and no parts available. I think someone should take a serious look into why their units fail so commonly and no recall has been issued. It’s not a nicety to have brakes. It’s a major safety issue!!! Thank you.
The first time happening I was driving on the interstate going about 70 miles an hour in the dark, the car completely shut down with no warning I was able to coast then tried to restart the vehicle and it started. I was able to get off the road and to my destination. The second time this happened, it was 5am in the morning getting on the interstate going about 40 miles an hour I got to the end of the ramp and merged into traffic again no warning the car shut down. This time the vehicle would not restart. I was able to coast to the shoulder with traffic approaching on me. Had to wait for a tow in the dark by myself.
ABS system module has failed and the manufacturer has it on indefinite backorder. I read reports of some customer waiting over 400 days for this part. It compromises the effectiveness of the antilock braking system. How do they get away with this?
My ABS module is confirmed faulty resulting in an unsafe car to drive. The ABS module is extremely hard to come by, on an indefinite backorder, and I cannot get the part anywhere. Maybe people waiting over a year for the part. This is resulting in aftermarket or refurbished parts, which are risky and unsafe. I am out of a vehicle because I cannot get the part and no one wants to buy a faulty car.
During a routine maintenance visit, a pre-purchase/general inspection was performed on my 2017 Jeep Wrangler, which documented the front axle and differential housing as intact and in one piece. Subsequent to that inspection, while the vehicle was undergoing service, it was discovered that the front axle housing bracket on the driver’s side had fractured and separated from the frame mount. Upon inspection of the fractured surface, the break exhibits oxidation (rust) at the fracture point itself, indicating the crack had been forming and propagating over time rather than resulting from a single acute impact or event. This suggests a pre-existing metal fatigue or corrosion-related structural weakness in the front axle housing bracket assembly that was not visually detectable during a standard inspection prior to full separation. Given that this is a structural component connecting the front axle/differential to the vehicle frame, a full separation of this type could result in loss of vehicle control, particularly under steering or load stress, and poses a significant safety risk. The vehicle is approximately 9 years old with 90,000 miles, and this type of structural failure at this age/mileage is a concern for other owners of similar model year Wranglers. I am filing this report to make NHTSA aware of this failure mode in case it represents a broader pattern in 2017 (and potentially adjacent model year) Jeep Wranglers.
ABS MODULE HAS FAILED VIN [XXX] No ABS and no cruise control The ABS module is on back order and cannot be purchased by OEM. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Oil cooler split due to warming up and cooling down in winter and being made of plastic All brake calipers needed to be replaced on it too
The contact owns a 2017 Jeep Wrangler. The contact stated that while traveling at 60 MPH, the vehicle struck a deer. The airbags failed to deploy upon impact. No injuries were reported. No police report was filed. The vehicle remained operable and was driven to the residence. Two days later, the airbag warning light illuminated. The manufacturer was notified and confirmed there were no open recalls or active warranties for the vehicle. The contact was then referred to the NHTSA Hotline to file a report. The vehicle had not been repaired. The failure mileage was approximately 140,000.
Front brake caliper became loose, moved away from the rotor, resulted in the caliper grinding against the inner wheel. Inspection by mechanic revealed missing caliper mounting bolts on both driver and passenger side of brakes. Front caliper mounting bolts were replaced with OEM-spec hardware, torqued to spec, with blue Loctite added to threads of fasteners. The mechanic noted many well-documented failures of the same nature on Jeep JK, JL, and Gladiator models, although no formal recalls have been issued.
The battery terminals will stop tightening, which made me think it was fully tightened. I wiggled them from side-to-side and they didn't move. As I was driving, the vehicle died, which almost caused an accident because the steering wheel locked. I was able to get the vehicle to a safe stop and hook up a jump pack to it. I then discovered that my negative battery terminal wasn't even on the battery post. It slipped off when lifted UP but didn't move AT ALL when wiggled side-to-side. I am unable to find the proper OEM replacement battery terminals at this time.
My 2017 Jeep Wrangler experienced repeated brake system failures beginning shortly after purchase. After extensive brake repairs, the vehicle was ultimately diagnosed with a failed ABS control module. The vehicle is unsafe to operate due to loss of ABS/stability safety systems. Jeep/Stellantis has the required OEM module on national backorder with no repair timeline (some other jeep owner reports say it has been on backorder for up to 18 months), reportedly under engineering review. Dealerships and mechanics indicate this issue is widespread among Jeep Wranglers. The inability to obtain a safety-critical brake component leaves the vehicle effectively unusable and unable to be safely repaired (has been undriveable since Feb 11 2026).
Showing 12 of 311 complaints.