Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2016 Mazda CX-5, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Mazda CX-5 year.
NHTSA lists 5 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Risk: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Campaign 16V644000
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
Risk: If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Remedy: Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
Campaign 16V203000
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda CX-5 vehicles manufactured June 27, 2013, to February 2, 2016. The affected vehicles have a fuel filler pipe that may rupture in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 301, "Fuel System Integrity."
Risk: A rupture of the fuel filler pipe may result in a fuel leak, increasing the risk of a fire.
Remedy: Mazda will notify owners, and dealers will alter the attachment between the fuel filler pipe and the left rear side of the bracket of the fuel filler pipe, free of charge. The recall began on February 25, 2016. Owners may contact Mazda customer service at 1-800-222-5500, option 6. Mazda's number for this recall is 9216B.
Campaign 16V064000
Issue: Pilkington North America, Inc. (Pilkington) is recalling certain replacement windshields, model FW04026 GTY, manufactured November 23, 2015, to December 16, 2015 for use in Mazda CX-5 vehicles that are equipped with the Smart City Brake Support system. The affected windshields have a bracket mounted on the inside to hold a laser sensor or LIDAR device for the Smart City Brake Support system. These brackets were improperly affixed with only tape instead of tape and urethane and therefore may loosen.
Risk: If the bracket loosens or detaches from the windshield, the safety features of the Smart City Brake Support system may be disabled and therefore increase the risk of a crash.
Remedy: Pilkington will contact the wholesalers and retailers that purchased the windshields to try to identify the affected customers. The affected windshields will be replaced, free of charge. This recall began on February 15, 2016. Owners may contact Pilkington at 1-844-278-7230.
Campaign 16E002000
Issue: Mazda North American Operations (Mazda) is recalling certain 2016 CX-5 vehicles. The LED Daytime Running Lights (DRL) may fail while driving.
Risk: If the DRL fails, the vehicle's visibility may be reduced to other drivers on the road, increasing the risk of a crash.
Remedy: Mazda will notify owners, and dealers will inspect the headlights, and replace the sealing gasket or headlight assemblies, as necessary, free of charge. The recall began March 20, 2020. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 4320A.
Campaign 20V063000
The parts named most often across 510 owner complaints filed with NHTSA for this make, model and year.
3 crashes
3 crashes
1 crash
2 crashes
1 crash · 1 fire
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear subframe issues caused multiple failures of virtually every component of the rear suspension - control arms, rear springs, etc. The repair cost for JUST the subframe was $3813. Not repairing it was not an option - the vehicle had failed mandatory State of Maine inspection (a safety thing, if I'm not mistaken). This should be a Mazda problem, not a me problem. I contacted Mazda USA about this issue and got no response.
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear subframe issues caused multiple failures of virtually every component of the rear suspension - control arms, rear springs, etc. The repair cost for JUST the subframe was $3813. Not repairing it was not an option - the vehicle had failed mandatory State of Maine inspection (a safety thing, if I'm not mistaken). This should be a Mazda problem, not a me problem. I contacted Mazda USA about this issue and got no response.
The contact owns a 2016 Mazda CX-5. The contact stated while driving at an undisclosed speed, the electric parking brake module warning light was illuminated and the "Brake failure. Vehicle unsafe to drive," message was displayed on the instrument panel. The vehicle was taken back to the residence. The failure occurred on several different occasions. The contact expressed concern that the brakes could engage while the vehicle was in motion. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 84,000.
Repeated Failure and Rebooting of Mazda Connect Infotainment System I am the owner of a 2016 Mazda CX-5. The factory Mazda Connect infotainment system has developed a recurring defect in which the system repeatedly reboots to the Mazda logo while driving. Prior to complete failure, the navigation system became intermittent and Bluetooth connectivity frequently disconnected, requiring repeated attempts to reconnect devices. The system now continuously cycles through the startup screen, making navigation, hands-free phone functions, and system settings inaccessible. These repeated reboots occur while the vehicle is in motion and are distracting to the driver. The flashing and rebooting screen repeatedly draws the driver's attention away from the road and interferes with the use of navigation and hands-free communication features that are intended to promote safe driving. After researching this issue, I found numerous reports from other Mazda owners experiencing the same symptoms involving the Mazda Connect system, navigation SD card, and Connectivity Master Unit (CMU). The frequency and similarity of these reports suggest that this is a widespread and well-known defect rather than an isolated incident. Because this defect affects driver attention and the safe operation of the vehicle's communication and navigation functions, I respectfully request that Mazda and the National Highway Traffic Safety Administration investigate this matter and require Mazda to issue a recall or establish a repair program for affected vehicles. Vehicle: 2016 Mazda CX-5 Mileage: 70k
The contact owns a 2016 Mazda CX-5. The contact stated that while driving 70 MPH with the cruise control activated, the cruise control cancellation switch failed to operate as intended after several attempts or while depressing the brake pedal. No warning light was illuminated. In addition, the contact was able to deactivate the cruise control using the main cruise control power switch. The vehicle was taken to a local dealer to be diagnosed; however, the cause of the failure was not yet determined. The vehicle was not repaired. The manufacturer was made aware of the failure by the local dealer. The failure mileage was approximately 91,000.
In 2024 I started having problems with my battery replaced it 3 times last time with a Mazda battery per Mazda advice. The car started to jerk while driving took it back to Mazda said it could be fuel injectors. They cleaned them and problem persists. Took it back they cleaned purve valve and then I broke down while leaving on [XXX] . Called service dept called police since it was in the middle of the blvd. And in traffic. We were lucky no one hit us. They took my car gave me a loaner had it for 10 days. Couldn’t find any problems. Then in 4/2025 it completely died at my home I called Mazda they were able to jump the battery and had it for a month. Couldn’t find any problem. And now we are in 5/2026 my car was in my drive without out being driven for 3 days and now is dead once again. But it is so dead that I cannot open with fob and dash board is black. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2016 Mazda CX-5. The contact stated that the engine light illuminated. The vehicle was taken to an independent mechanic diagnosed with a sensor failure and needing to replace a catalytic converter. The oxygen sensors were repalced.r was replaced by an independent mechanic. The vehicle stalled while reversing. The manufacturer was not notified of the issue. The approximate failure mileage was 131,860.
(I am the owner of the car and am filling this out for my daughter who was driving it at the time, I was not with her during the incident) While driving down the road in the rain the wipers just stopped working. I have not had any dealers ID the specific problem yet. We replaced the wiper 20amp fuse and it did not fix the problem. There were no warning lamps and there are still no warning lamps. My safety was put into danger when I could not see out the window. I was nearly at work so I waited for the rain to slow down some was able to make it to work. The rain cleared while I was at work and it has not rained since. It is available for inspection upon request.
Any time the vehicle has been sitting with the engine off and has been given enough time to “cool down”, upon starting the vehicle and switching from PARK to DRIVE, the vehicle will violently lurch forward while attempting to reach 2nd gear. This is dangerous behavior that is not normal for any vehicle. There is clearly something wrong with either the transmission or the way the software communicates with the transmission. When the engine is within normal temperature it doesn’t display this dangerous behavior. A similar TSB was issued for the 2nd generation of CX5s but not for this generation of CX5s
I was slowly turning left into an alley when I heard a loud noise, the front of my car dropped, and the car immediately stopped and was immovable. Upon getting out of the car, it appears some joint separated from the wheel.
My wife was driving our 2016 Mazda CX-5, and was getting ready to pull into our daughters' driveway. My wife slowed down to a stop before entering the driveway. She gave the vehicle some gas to move forward. She stated that there was a pause, then the vehicle accelerated forward slamming into the garage door and the corner of the garage/house. There was also a Tesla parked inside the garage that was knocked back about a foot and a half. The distance from the edge of driveway and street to the garage door is about 27 feet. This happened at 1:30 PM. The weather conditions were great, sunny and dry. Thankfully, no one was hurt. If my wife was another foot to the right, she would have hit the support post for the upper balcony, and there would have been a good chance of the balcony falling on top of her. Or, if someone was standing in front of my wife when she entered the driveway, they could have seriously been hurt! There were no warning lights on prior to the accident. This happened last Sunday, April 19, 2026. We had the car towed to a local body shop on the same day as the accident. The vehicle was towed away the very next day to our insurance company's salvage lot in Bakersfield. I do have all the information, address and phone number, of the lot where our car was towed to. Hopefully, the car can still be inspected by the proper authorities. Thank you for your time!
The contact owns a 2016 Mazda CX-5. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle, and the message “Smart Brake Malfunction” was displayed. The vehicle was taken to an independent mechanic, where it was diagnosed with catastrophic brake caliper failure. The contact was unsure if the vehicle needed to be repaired. The vehicle was then taken to the dealer, where it was diagnosed, and it was determined that the passenger’s side inner CV joint had failed and needed to be replaced. The vehicle was not repaired. The dealer informed the contact that the vehicle could not be driven due to the severe failure. The manufacturer was not made aware of the failure. The approximate failure mileage was 125,385.
Showing 12 of 510 complaints.
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
NHTSA frontal crash test
Rated configuration: 2016 Mazda CX-5 SUV AWD