Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2011 Mazda CX-7, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Mazda CX-7 year.
The parts named most often across 154 owner complaints filed with NHTSA for this make, model and year.
1 crash
2 crashes · 3 injured
1 crash · 1 injured
2 crashes
1 crash
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
The contact owns a 2011 Mazda CX-7. The contact stated that while attempting to start the vehicle during or following a heavy rainstorm, the vehicle failed to start immediately. Once started, the engine vibrated, the vehicle failed to accelerate properly, and the check engine warning light illuminated on the instrument panel. The contact stated that the failure self-corrected once the vehicle dried. The vehicle was taken to an independent mechanic and a local dealer, where it was diagnosed that the PCM C31 connector failed due to moisture and corrosion, requiring service or replacement. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under extended warranty coverage. The failure mileage was 120,000.
The low beam wiring gets hot and melts the connectors to the bulb connection. The low beam headlights have been replaced 8 times in a year due to low visibility. It's like turning off the headlights but they are still on. It's been going on for years. I've taken it to Mazda and the mechanic told me they had a vehicle there now with the same problem and have not figured out the problem yet. Wiring harness has been replaced to the low beam, the connectors and bulbs replaced fuzes and nothing seems to fix it, the battery keeps needing to be replaced as well, alternator has been replaced. This is a safety issue due to the fact that the low beams are so dim the driver can't see to drive without using high beam headlights to drive and they are just like having regular low beams on.. I've used halogen as well as led trying to fix it nothing has worked
My wheel on front driver's side is wobbly and I just decided to look up for any recalls and I'm lucky we didn't have a major accident I drive the interstate almost daily also I want to report that my door handles have had to be replaced 6 times since we've bought the car in 2019
Mazda has messed up headlights and it is very dangerous. I have to drive with high beams on continuously! The low beams point straight down to the road, looks like even with the bumper, you cannot see anything. It looks like you don’t have lights on. Took it to dealer and they say it’s the housing and it’s a Mazda thing and don’t do anything to fix it. I have tried every bulb available for Mazda and nothing helps. They need to fix this. I see SEVERAL owners with the same complaints! Please don’t overlook this as it is very dangerous and may cause deaths.
My mechanic told me to check with Mazda as there might be a recall that has not been taken care of yet. I called Mazda and they told me there were 3 recalls (2 of which my mechanic already fixed) and the airbag recall. Told me not to drive, but would not provide any vehicle to use and would not set an appointment until December 8th, 2025.
The contact owns a 2011 Mazda CX-7. The contact received notification of NHTSA Campaign Number: 17V429000 (Air Bags); however, the part to do the recall repair was not yet available. The contact called an independent mechanic, but no assistance was provided. The local dealer was contacted. The dealer declined to tow the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
I can not see at night. I have replaced the bulbs several times, and tried the most expensive bulbs. Nothing helps. You can only see with the high beams on, and that’s not safe for other drivers
Recall on air bag throwing metal
I called Mazda to report that my air bag warning light came on and they told me it had been replaced on Jan 8, 2019 and was not under recall. Not sure what to do as light stays on all the time while driving.
The headlights are UNSAFE! Extremely dim. We have replaced the bulbs and gotten great LED lights but the issue is still there. Sometimes I feel like my lights aren’t even on but they are, I cannot see. Please can you fix this. They just keep getting worse. I would have to drive with high beams on just to be safe. I don’t drive at night in my car if I don’t absolutely need to because of this issue.
During a rainy evening I could not see with the wipers on max speed and the headlights on low beam. I couldn't see the road unless a car was in front of me or I turn on my high beams. My son was in the car with me and several times I had to go at a crawling speed and still barely stayed on the road because of low visibilty. This has happened more than once and I feel unsafe driving now because I feel like I'm driving with no lights on at all these days without rain and rain makes it 10x worse.
Just bought this car used and the very first night I realized that the headlights are very very very dim. After online research, it seems this is a common issue with make model&year.
Showing 12 of 154 complaints.
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
Rated configuration: 2011 Mazda CX-7 SUV AWD
NHTSA has issued a do-not-drive warning covering 3 recalls on this make, model and year. Repairs are free at any franchised dealer.
Recalls are issued per model. Confirm whether this specific car has already been repaired using its VIN, free, at any franchised dealer or on nhtsa.gov/recalls.
NHTSA lists 4 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.
Campaign 18V717000
Issue: Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.
Campaign 19V782000
Issue: Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.
Campaign 17V429000
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2007-2012 Mazda CX-7 vehicles manufactured February 14, 2006, to May 9, 2012. In the affected vehicles, water may enter the front suspension ball joint fittings. If the water is contaminated with salt, such as from driving on snowy roads that have been treated, the ball joint may corrode and separate from the lower control arm, resulting in a loss of steering control.
Risk: A loss of steering control can increase the risk of a crash.
Remedy: Mazda will notify owners, and dealers will replace both front lower control arms, free of charge. As a priority, Mazda will first address all affected 2007-2008 vehicles as well as 2009-2011 vehicles currently registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia. West Virginia, Wisconsin, and the District of Columbia. The remaining vehicles will be addressed as parts are available. The recall began September 20, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9716H.
Campaign 16V593000